![background image](http://html1.mh-extra.com/html/lts/cmip7442w-28m/cmip7442w-28m_user-manual_1945237097.webp)
User Manual of Network Camera
97
10.6.2
Restoring Default Settings
Steps:
1.
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or
Configuration > Advanced Configuration> System > Maintenance
2.
Click
Restore
or
Default
to restore the default settings.
Figure 10-12
Restore Default Settings
Note:
After restoring the default settings, the IP address is also restored to
the default IP address, please be careful for this action.
10.6.3
Exporting / Importing Configuration File
Purpose:
Configuration file is used for the batch configuration of the camera, which can
simplify the configuration steps when there are a lot of cameras needing configuring.
Steps:
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or
Configuration > Advanced Configuration> System > Maintenance
1.
Click
Export
to export the current configuration file, and save it to the certain
place.
2.
Click
Browse
to select the saved configuration file and then click
Import
to start
importing configuration file.
Note
: You need to reboot the camera after importing configuration file.
3.
Click
Export
and set the saving path to save the configuration file in local storage
.