![background image](http://html1.mh-extra.com/html/lts/cmip7442w-28m/cmip7442w-28m_user-manual_1945237059.webp)
User Manual of Network Camera
59
cooperatively with NVR to implement dual-VCA retrieval during playback.
Figure 6-29
Display Info. on Stream
6.5
Configuring Image Parameters
6.5.1
Configuring Display Settings
Purpose:
You can set the image quality of the camera, including brightness, contrast,
saturation, hue, sharpness, etc.
Note:
The display parameters vary according to the different camera model. Please refer to
the actual interface for details.
Steps:
1.
Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2.
Set the image parameters of the camera.
Note:
In order to guarantee the image quality in the different illumination, it provides two
sets of parameters for user to configure.