2.2 Installation of Type
Camera
II
3.Align the base plate with the mounting template
and secure it with supplied self-tapping screws.
4. Route the cables through the cable hole.
5. Connect the corresponding cables.
6. Adjust the camera according to the figure below
to get an optimum angle.
8. Push the black liner and bubble toward the
camera and buckle them upon to secure them on
the camera.
Base Plate
Figure 2-3 Fix the Camera to the Ceiling
P Direction
0 ~350
°
°
0 ~70
°
°
T Direction
Figure 2-4 3-axis Adjustment
Figure 2-5 Complete the Installation
1.
Loosen the screws on the bubble to remove the
bubble and the black liner.
Figure 2-6 Remove the Bubble
2.Drill the screw holes and cable hole on the
ceiling according to the supplied drill template.
Drill Template
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
1
1
1
A
Figure 2-7 Drill Template
Screw Hole
Cable Hole
3.Align the base plate with the mounting template
and secure it with supplied self-tapping screws.
4. Route the cables through the cable hole.
5. Connect the corresponding cables.
6. Adjust the camera according to the figure below
to get an optimum angle.
Figure 2-8 Fix the Camera to the Ceiling
8. Fit the black liner and bubble on the camera.
R Direction
-15 ~15
°
°
0 ~75
°
°
P Direction
0 ~360
°
°
T Direction
T Direction
Adjustment
Screw
Figure 2-9 3-axis Adjustment
Figure 2-10 Complete the Installation
Rotate the bubble after completing the
Installation may change the postion of the lens.
0 ~350
°
°
R Direction
3.2.2 WB
3.2.1 AE
Move the cursor to AE, and you can adjust the
image brightness by the
,
BRIGHTNESS EXPOSURE
MODE
AGC
, and
.
:
Brightness
Brightness refers to the brightness of the image.
Exposure Mode:
Move the cursor to
, you can select
Exposure Mode
the exposure mode between
and
.
Globe
BLC
When BLC is selected as the exposure mode, the
level of BLC mode can be adjusted, as shown in the
Figure 3-2.
3.2.4 VIDEO SET TING
Contrast
:
Contrast enhances the difference in color and light
between parts of an image.
You can set the value from 1 to
.
10
Sharpness
:
Sharpness determines the amount of
detail that an imaging system can reproduce.
You can set the value from 1 to 10.
Saturation:
You can set the saturation level of the image. The
value is from 0 to 10.
DNR:
DNR decreases the noise effect, especially in low
light conditions and delivers more accurate and
sharp image quality. You can set the value from
0 to 7.
:
Mirror
You can set the Mirror status as H, V, HV, or OFF.
3 Menu Operation
Figure 3-1 Main Menu
VIDEO
SETTING
DAY/NIGHT
WB
RESET
BRIGHTNESS
MODE
INFRARED
SMART IR
CONTRAST
SHARPNESS
SATURATION
EXIT
AE
DNR
MIRROR
EXPOSURE MODE
AGC
SAVE/EXIT
With a coaxial camera controller (purchase
separately) or calling the preset No.95 you can
select the menu and adjust the camera parameters.
3.1 FORMAT
You can set the format as PAL/NTSC.
3.2 SET UP
Move the cursor to
, and press menu button
SET UP
to enter the SET UP sub menu.
EXPOSURE
1.BRIGHTNESS
2.EXPOSURE MODE
LEVEL
3.AGC
4.RETURN
5
BLC
5
MIDDLE
Move the cursor to WB, and you can set White
Balance mode as
and
in this menu
AWB
MWB
.
AWB:
white balance is being adjusted
automatically.
: Set the
value from 1 to 10.
MWB
R GAIN/B GAIN
As shown in Figure 3-3.
WB
MODE
MWB
R GIAN
1-|--10
B GAIN
1-|--10
RETURN
8
AGC
:
AGC optimizes the clarity of image in poor light
scene. AGC level can be set as OFF, LOW, MIDDLE
and HIGH.
Figure 3-2 EXPOSURE
Figure 3-3 WB
Figure 3-4 DAY/NIGHT
3.2.3 DAY & NIGHT
Move the cursor to DAY & NIGHT, and select
COLOR B/W
SMART
,
, or
as the DAY & NIGHT mode.
COLOR
: The image is colored in day mode all the
time.
: The image is black & white all the time, and
B/W
the IR LED turns on in the low-light conditions.
: Select to turn on/off the INFRARED_LAMP
SMART
and to set the Smart IR level from 1to 16.
As shown in Figure 3-4.
DAY/NIGHT
MODE
SMART
INFRARED
OFF
SMART IR
0-|--5
RETURN
8
3.2.7 SAVE/EXIT
3.2.5 Reset
Reset all the settings to the default.
3.2.6 EXIT
Exit and Save & exit are selectable.
Move the cursor to
, and press OK to
SAVE & Exit
save the settings and exit the menu.