Ltl Acorn Ltl-6310-3G, User Manual

Page: 35 / 41

33
FIRMWARE UPGRADES
The manufacturer reserves the right to upgrade the camera firmware and 3G
module program, please consult with the local distributor for the website to
download the program.
Make sure the camera with enough power before upgrade to avoid the
unsuccessful upgrade or the fault caused by low battery after upgrade.
Please follow below instruction to upgrade:
Prepare SD card

Connect the SD card to camera and back up the SD
card contents to computer (SD card reader may be
needed).

Retrieve the SD card from computer, insert it into
camera and load batteries.

Format the SD card on the camera.
Upgrade camera firmware

Retrieve the SD card and plug it into your computer
(SD card reader may be needed). Copy the program
file FW63103G.bin to the root directory of the SD
card (consult with the local distributor to obtain the
file).

Retrieve the SD card from computer, lock it and
insert into the camera.

Long press left key and switch camera to
TEST mode from OFF, Updated Firmware
Successfully would be shown on LCD. Release left
key , press MENU key to enter menu and move
to default setting, press OK to confirm.

Retrieve the SD card and unlock it, then re-insert
into camera and format it. The upgrade will have
been finished successfully.
Attention: The upgrade program of Ltl-6310-3G is not compatible to
other models. In other word, an upgrade for Ltl-6310-3G only applies to
Ltl-6310-3G model. If a camera is accidently upgraded by running a
non-compatible program, it will quit working and needs to be sent back
for repair. This issue is not covered under warranty.
Upgrade 3G module program