
After camera setup finished, copy the configuration file to SD card for
installation. Switch the camera to
TEST
mode, the massage “Updated
menu.dat Successfully” would be shown on TFT LCD screen, the
configuration has been updated successfully.
After camera setup finished, copy the configuration file to SD card for
installation. Switch the camera to
TEST
mode, the massage “Updated
menu.dat Successfully” would be shown on TFT LCD screen, the
configuration has been updated successfully.
Ltl-5610 Series Products And Components
4.1 Ltl-5610 Series Component Parts
1. Ltl-5610A/ WA/ MC/WMC/MG/ WMG camera main unit
2. Ltl-BM3 standard battery box (without MMS module), 8AA batteries
loadable
3. Ltl-MM3 wireless module battery box, 8AA batteries loadable
4.2 Models for Purchase:
Ltl-5610A 55° lens angle scouting camera
Ltl-5610WA 100° wide lens angle scouting camera
Ltl-5610MC= Ltl-5610M Ltl-BM3 Standard battery box
Ltl-5610WMC= Ltl-5610WM Ltl-BM3 Standard battery box
Ltl-5610MG= Ltl-5610M LTL-MM3 wireless modules battery
box
Ltl-5610WMG= Ltl-5610WM LTL-MM3 wireless modules
battery box
Ltl-BM3 Standard battery box
- 37 -
Summary of Contents for Ltl-5610 Series
