
If
No MM1
is shown on the screen, it means the MMS module is not found
(or not installed). The buzzer will make alerts
"
Di Di Di
" at this moment
,
please reinstall the wireless module battery box to insure the correct
connection.
Note
: When installing wireless module battery box, the camera must be in
OFF mode. Make sure the battery compartment is locked by the side clips.
Otherwise, the MMS feature may not work properly. When viewing the
operator's name and the signal strength, if not wait up to
1 minute
to
separate the camera and battery box, it is less likely to obtain the mobile
network successfully. In this case, please switch the camera off and reinstall
the battery box to try again.
3.9 Set up Camera on Mobile Phone
Download and install mobile Setup APP
Get the Setup.apk from CD or download it from Ltl Acorn’s website:
http://www.ltlacorn.cn/about/downloaden.html
(Download →Classification → APP→ Setup)
Copy the Setup.apk to mobile phone with USB or by any other methods, and
then install the APP.
Attention: An external disc drive may be needed if your computer is
without disc drive. Please turn on the mobile GPS function when install
the APP, otherwise the mobile phone would not be able to achieve the
coordinate information.
- 33 -
Summary of Contents for Ltl-5610 Series
