- 19 -
--
Auto
or
Manual
. Choose
Auto
(recommended), then
select the country
and the Mobile Phone Network
Operator (MPNO). With
Auto
setup, the URL, APN, Gateway, and Port sections will be in gray.
You would only need to input the
phone number and/or email address
you’d like to receive
MMS pictures. You can enter up to three different
phone numbers and/or email accounts
.
NOTE
: At least one valid phone number needs to be put in. Otherwise the camera would not be
able to send data. The phone number cannot start with 0. If used locally, the country code needs
not be included; if absolutely necessary, please replace the initial zero(s) with “+”. For example
：
“001” would become “+1”.
If you choose
Manual
to manually input all the parameters, you need to contact your Mobile
Phone Network Operator (MPNO) to have them provide you all the required information such as
URL, APN, Gateway, and Port.
NOTE
: The MMS parameters of the major MPNO’s in each country have been pre-stored in the
setup program. You’re recommended to choose
Auto
to let the system to set up the MMS.
However, because each local MPNO has their own settings for their MMS service, and those
settings can change over time, you may need to acquire the settings from your MPNO if the
Auto
-selected settings fail to work. If you find out those settings have changed according to the
information provided by your MPNO, or you have settings from your MPNO that is not on our
Operators list, please notify us so we can update our program.
Click on
to find and choose the drive where the SD card is placed. For example,
the SD card is inserted on Drive F:\. Then you select only F:\.
DO NOT choose any folder under
F:\.
Click on
. A message window pops out as below. Click
OK
. A file named
setup.dat
has been created and saved in the root directory of the SD card.
LTL
ACORN
®