- 9 -
2.4 Enter Live Mode
Switch to the ON position to enter the live mode. The Motion Indicator will flash red for about
10 seconds and the camera starts working automatically. When game first crosses the PIR area,
the PIR sensor will detect and be activated. If the game continually enters into the overlapping
area of left and right sensor, the camera takes picture or video immediately. If the game leaves
the overlapping area, the camera would be off and enter sleep mode.
2.5
Advantages of two horizontal PIR design
In general, to save battery power, an Infer-Red camera is in “sleep” mode, with only the PIR
sensor working. When game is detected by the PIR sensor, the camera is powered on and starts
shooting pictures. The period from being activated to start firing is called trigger time. The
trigger time varies from different scouting camera brands in the market, generally from 1.3 to 5
plus seconds. Our LTL ACORN scouting camera has an impressive 1 second trigger time.
Ltl-5511MG infrared camera is our latest product with new patented design of two horizontal
Pyroelectric Infrared Radial (PIR) Sensors
. This design has the following advantages:
Minimize the time for shooting. Two side PIR come up with a 100° angle of induction, a very
wide scope far outweighing the 55 ° angle of the camera lens. When game first crosses the PIR
area of the PIR sensor, the camera is activated and ready to shoot. If the game continually enters
into the overlapping area of left and right sensor, the camera takes pictures immediately,
therefore catching the whole body of the game. This split-second process could be short as 0.2
second. However, when game passes quickly, traditional camera may only capture
LTL
ACORN
®