10
CLEANING INSTRUCTIONS
To maintain the performance and finish of the unit clean the unit daily. Make sure to use
cleaning supplies and cleaners designed for cleaning stainless-steel surfaces.
Stainless steel:
Use soft cloths, microfiber, sponges, or plastic scouring pads. Avoid using scrapers wire brushes,
steel wool or anything that might scratch the surface. Always clean stainless-steel parallel with
the “grain”. Use cleaners that contain alkaline, alkaline chlorinated, or no
n-chloride chemicals.
CONDENSER COIL
WARNING:
Always disconnect power before inspecting or cleaning condenser coil. Never use
high-pressure water to clean condenser coil as water can damage electrical components
located near the condenser coil.
The condenser coil requires adequate cleaning to maintain proper operation which is
recommend every 90 days. If debris is more prevalent the condenser coil should be cleaned
every 30 days. Neglecting the condenser coil cleaning procedures will void any warranties
associated with the condensing unit or cost to replace the compressor
