9. Other Special Functions:
Turn on the remote, long press the “on/off” key for 5 seconds until the red light flashes 3 times, and then the green light flashes, the
numbers of the green flash will be the frequency point of the remote. you can only edit the frequency point after 3 seconds.
In frequency changing state,
A. Reset Function:
B. Check and Edit the Frequency Point on the Remote:
Long
press the 2 keys
simultaneously
,
release
after 3 seconds,
the
remote
will
auto
off
,
undo for more than 1 minute, means
reset
completed
.
and then could restart the remote.
Feature:
Reset function is available when remote operates abnormally.
Operation:
a.
b. Multiple remotes sync-control becomes available when they use the same frequency point.
Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user.
Attn:
After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID.
Feature:
Check the Frequency Point on the Remote:
Edit the Frequency Point on the Remote:
Method 2: Long press “on/off” key over 5 seconds, the green light flashes, the flash times plus 1 means the frequency point accumulate 1.
In short, long press the “on/off” key over 5 seconds each time, the frequency point will accumulate 1, which will again become value 1
when added to 12, and that cycle repeats.
Method 1: Short press any key from “1-8”, the frequency point will be “1-8” correspondingly, the green light will flash in the same numbers. Then
press any key or touch the color circle to exit the frequency edit state.
— 9 —
LED RGBW Controller
