Ltech T3M, Quick Start Manual

Page: 2 / 3

3 4
5. The Charging Methods for Remote Control:
1. When charging, please connect USB cable to the mobile charger or computer with the USB interface.
7. Tables of Changing Mode:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Description No. Mode Description
No. Mode
3 Colors Skipping
7 Colors Skipping
White Strobe
7 Colors Strobe
Rgb Fade out and Fade in
Red Green Color Smooth
Red Blue Color Smooth
Green Blue Color Smooth
Red Yellow Color Smooth
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Green Cyan Color Smooth
Blue Purple Color Smooth
Green Yellow Color Smooth
Blue Cyan Color Smooth
Red Purple Color Smooth
Blue White Color Smooth
Yellow Purple Cyan Color Smooth
RGB Color Smooth
Full-color Smooth
Learning ID:
Cancelling ID:
1. Turn on the receiver and remote control.
2. Press “on/off button” on the T3-5A or “ID learning button” on the T3-CV, T3-CC for 2 seconds, there is a buzzer
sound, and do not release your hand on the button, at the same time press any keys of 1-10 zone on the remote
control, until the remote control green LED indicator light flashes 3 times (a voice prompt at the same time), release
all the keys.
1. Turn on the receiver and remote control
2. Press “on/off button” on the T3-5A or “ID learning button” on the T3-CV, T3-CC for 2 seconds, there is a buzzer
sound, and do not release your hand on the button, after 5 seconds press any keys of 1-10 zone on the remote
control, until the remote control red LED indicator light flashes 3 times (a voice prompt at the same time), release
all the keys.
4. Red indicator light flickers meaning low battery and need to be charged. charging in low battery will affect life of
battery.
3. No memory effect in the lithium battery of remote control. Follow the standard charging procedure even for the first
three times, no need over charge.
2. The blue indicator light flickers while charging, and turns green means the charging is completed. The remote
control can be chargeable even at the OFF state, on which the indicator light is black.
T3M 2.4 G LED RGB Controller Manual
LTECH
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD.
WWW.LTECHONLINE.COM LT@LTECHONLINE.COM
Tel: +86 756 620 8823 Fax: +86 756 620 8833
T3M 2.4 G LED RGB Controller Manual
LTECH
On/Off Key
Pause Key
Mode Keys
Speed Keys
Brightness Keys
12
Power Input Socket
DC12 ~ 24V
LED Lamp connected socket
T3-5A
DC12V
~
48V
T3-CC
Current selection switch
( Method of operation see below form )
Remote ID
Learning Button
Power Input Socket
LED Lamp Connected Socket
DC5V ~ 24V
T3-CV
CV receiver
CC receiver
Remote ID
Learning Button
Power Input Socket
LED Lamp Connected Socket
4. Operation Panel and Component Instruction:
On
/
Off
Pause Key
Mode Key
Zone Selection s Key
Scene-save Keys
Touch Full-color Circle
Speed Key
Brightness Key
Sync Status Indicator Light
M1 M2
3 2
10
6 5 4
9 8 7
(Keep pressing to adjust brightness continuously)
●
Select one of the zone: Press keys 1-10 on the remote control.
All choose(10 zones): Press" " twice.
Select zone control arbitrarily :Press" +any ",
eg: take 456 as a zone, should press" 456 "
Zoning Instructions:
●
●
★
Other function: Press “Pause” button in 3 seconds, the buzzer can be on or off.
(Press for 3 seconds, can save the
scene mode in the 8 current
zone control)
5. Please make sure about 50% battery remaining on the remote control for long time no use, and it needs to be
charged at least two or three months, otherwise the capacity of the battery would be decreased or the battery gets
damaged.
6. The learning ID method of remote control: