4.
Remote control and automation
4.1 Remote control: Add Tuya Bluetooth MESH SIG) Gateway by search bluetooth devices, and follow the prompts to configure the gateway to the network. After
configuring the network, access the gateway interface and click "Add to the list" or "Search for new devices" to add the device to the gateway, and then the
device can be controlled remotely.
4.2 Automation settings: After adding Tuya Bluetooth MESH
SIG) Gateway, you’ll be able to control the lighting remotely by clicking ”Automation” in the
“Smart” menu. In “Automation”, set up conditions from weather, location and timing to other device status so as to trigger the lighting effects you preset
and realize the lighting automation.
Reset The Device (Reset
to
factory
defaults)
When the driver is power-on, turn it off and after 15s turn it on. After 2s, turn it off again. Repeat the same operation 5 times and then turn on the driver again.
When the lamp is flashing (2 flashes/s), reset the device successfully.
Turn it on 2s
Turn it off 15s
(
Repeat 5 times)
Turn it off
Turn it on
......
Under the driver being power-on
2s
15s
T
^
o
o
^
k
q
v
>
d
o
b
b
j
b
k
q
— 05 —
Tuya Bluetooth Mesh
