Zhengzhou Linghang Robot Co.,Ltd
14
Tool Plate
Adapter flange
Locating pin
3.4Tool Plate installation
Tools Requirements
：
3 mm Allen wrench, torque wrench.
Required items: cleaning cloth, LOCTITE 242 thread anaerobic adhesive.
1
、
Clean the mounting surface
；
2
、
Install the tooling adapter flange on the customer's tooling, align it with the
pin shaft, and fasten it with bolts (coated with LOCTITE 242 glue);Align with the
pin shaft and install the tool disc on the adapter flange with M8 screws
（
Gluing
LOCTITE242
）；
3
、
Install the tools on the adapter flange.
3.5 Tool Plate installation
3.6Remove Tool Plate
1
、
Tools requirements
：
3mm Allen wrench
；
2
、
Keep tools in a safe place
；
3
、
Release master plate and tool plate
；
4
、
Close and completely disconnect all energy connections; For example:
electrical, air, etc.
；
Install the screws
