LST LAM48-1 Specifications Download Page 3

Page: 3 / 3

PTU288-1_DBL_LST_EN_0804.PDF • PAGE 3

Building Safety. Building Security.

LED Connection Cord

The 2-wire connection cord serves to connect light

emitting diodes or relays to the LED Connection Mo-

dule LAM48-1. The cord is needed if other than the

pre-assembled LEDs are used, or if more than two Re-

lay Modules RL58-1 or RL58-2 – which can be directly

connected to the LED connection module via ﬂ at cable

– have to be actuated.

At one end of the cord there is a connector which ﬁ ts

to the pin connector of the LED Connection Module

LAM48-1, and the other end of the cord is open.

Speciﬁ cations

Line length

Order number

259013

Order name

Cord 2-Wire for LED Connection/10pcs. LED-LEITUNG-10

Summary of Contents for LAM48-1

Page 1: ...condition If needed it is also possible to combine several events into a summary display Furthermore the PTU288 has 5 freely parameterisable control inputs The remote tableau drive unit is connected...

Page 2: ...ther relays each The componentry is delivered with the material needed for mounting in the LST standard grid Speci cations Operating voltage 15 31VDC supply through PTU288 1 Current consumption at 24V...

Page 3: ...lays to the LED Connection Mo dule LAM48 1 The cord is needed if other than the pre assembled LEDs are used or if more than two Re lay Modules RL58 1 or RL58 2 which can be directly connected to the L...