——————————————
Zubehör von
—
Das Original
——
Rev. 04 21/11/2017
Seite 7 von 12
Assembly right side:
Step 1:
First connect brake light
switch to the harness, then
mount the brake light
switch in original position at
the rear set with supplied
M2 x 14mm bolt
M2 washer and
M2 nut befestigen.
Step 2:
If pillion support for tail is not in use:
Mount rear set with M8 x 20mm and bolt adhesive at the main frame.
If pillion support for tail is in use :
Mount rear set with M8 x 25mm and bolt adhesive with additional
2x distance bushing Ø 22 x 8,4 x 5mm at the main frame.
Step 3:
Mount foot peg with M5 x 25mm (6Nm) and bolt adhesive and insert plastic plug.
(distance bushing Ø 22 x 8,4 x 5mm,
if pillion support for tail is in use)
M8x20mm
(M8x25mm if pillion
support for tail is in use)
foot peg,
M5x25mm, plastic plug
