6
2.
Connect the wires
Red supply wire:
Connect after the ignition
switch, so that the gauge
switches itself on with the
ignition key.
Black supply wire:
Use the wire shoe and screw it
on some place of the frame, or
even to the (-) pole of the
battery. It can be also attached
to any other (-) wire (usually
black) using the cut in
connector included in the
package.
Supply wires are protected
against reversed polarity.
Display panel connector:
Connect the FuelGaugePro
original display panel or Low Fuel Warning Light here.
Never connect any wires of display panel connector together. It can destroy the whole Sensor!