LSIS eXP Series, eXP20-TTA User Manual Download Page 2

Page: 2 / 123

Safety Precautions

Before using the product…

To use the product safety and effectively, please read this instruction manual thoroughly before use.

►

Please keep to the safety precaution, for it to prevent accidents and potential danger from

occurring.

►

Safety precaution is classified into ‘Warming’ and ‘Caution’ and their meanings are as follows.

Warning

Violating the instruction may result in serious personal injury or death.

Caution

Violating the instruction may result in slight personal injury or product

damage.

►

The indicated illustrations on the product and in the manual have the fallowing meanings.

Be cautions, for danger may be present.

Be cautions, for there is a possibility of an electric shock.

►

After reading the instruction manual, keep it handy for quick reference.

Summary of Contents for eXP Series, eXP20-TTA



























































































































Search results

Summary of Contents for eXP Series, eXP20-TTA

Reviews:

Related manuals for eXP Series, eXP20-TTA

Brands by name

Popular brands

LSIS eXP Series, eXP20-TTA, User Manual

Search results

Summary of Contents for eXP Series, eXP20-TTA

Reviews:

Related manuals for eXP Series, eXP20-TTA

Brands by name

Popular brands