LSI Corporation
- 7 -
MegaRAID LSIiBBU09 Intelligent Battery Backup Unit Quick Installation Guide
August 2012
Connecting a Remote LSIiBBU09 Unit to a MegaRAID SAS 9266 RAID Controller
Reinstalling the RAID Controller on the Motherboard
Figure 3 Reinstalling the RAID Controller
5.
Replace the computer cover, and reattach the power cords.
6.
Turn on the power to the computer.
Connecting a Remote LSIiBBU09 Unit to a MegaRAID SAS 9266 RAID Controller
The procedures in this section show how to connect a remote LSIiBBU09 unit by cable to your MegaRAID SAS 9266-4i
RAID controller or a MegaRAID SAS 9266-8i RAID controller.
To connect a remote LSIiBBU09 unit to your RAID controller, perform the following tasks.
1.
Remove the RAID controller from the computer. See
Removing the RAID Controller from the Computer
on page
8
.
2.
Connect the cable between the RAID controller and the remote LSIiBBU09 unit. See
Connecting the Cable
Between the RAID Controller and the Remote LSIiBBU09 Unit
on page
8
.
3.
Reinstall the RAID controller in the computer. See
Reinstalling the RAID Controller in the Computer
on page
9
.
Edge of
Motherboard
PCI Express
Bracket
Screw
Press
Here
Press
Here
3_00891a-00
