LSI GS320 Installer'S/User'S Manual Download Page 2

THE GS320 SYSTEM

LIST OF FIGURES

Figure 1: GS320 Display ...............................................4
Figure 2: Example of ID number 18820 .........................4
Figure 3: Remove sensor box from mounting plate .......5
Figure 4: Install the new battery ....................................5
Figure 5: Apply non-corrosive RTV silicone ...................5
Figure 6: Unscrew the white nylon hex ..........................6
Figure 7: Pull out the antenna .......................................6
Figure 8: Coat the exposed metal foot of the antenna ...6
Figure 9: Install the new antenna ...................................6
Figure 10: Display dimensions (inches). Not to scale .....7
Figure 11: Display mounting bracket footprint. Not to scale .. 7
Figure 12: Install the display and adjust orientation .......7
Figure 13: Connection with green wire lockout and 
recommended Bosch relay ...........................................8
Figure 14: GS020 wireless wind speed sensor ..............9
Figure 15: Swivel orientation .........................................9
Figure 16: Wind clearance ............................................9
Figure 17: Radio line of sight – crane top view ..............9

TABLE OF CONTENTS

1: GENERAL ..............................................................3

1.1 Introduction ......................................................3
1.2 Recommended Operating Conditions .............3
1.3 Start-Up ...........................................................3
1.4 About This Manual ...........................................3

2: OPERATION ..........................................................4

2.1 Units .................................................................4
2.2 Alarm Threshold ...............................................4
2.3 Listen-Only Mode .............................................4
2.4 Display Settings  ..............................................4

3: MAINTENANCE .....................................................5

3.1 Replacing the Sensor Battery ..........................5
3.2 Replacing the Sensor Antenna.........................6

4: INSTALLATION ......................................................7

4.1 Display GS320 .................................................7
4.2 Power Supply Verification ................................8
4.3 Wireless Wind Speed Sensor GS020 ...............9

5: CERTIFICATION NOTES .....................................10

5.1 FCC and IC—Instructions to the User ...........10
5.2 CE ..................................................................11

6: LIMITED WARRANTY - APRIL 1

ST

, 2013 ...........12

6.1 Limited Warranty ............................................12
6.2 Warranty Services Procedures .......................12
6.3 Exclusion of Other Warranties ........................12
6.4 Exclusion ........................................................13
6.5 Limitation of Liability ......................................13
6.6 Recommended Practices ...............................13
6.7 Choice of Law ................................................13
6.8 Entire Agreement ............................................13
6.9 Vienna Convention Excluded .........................13

NOTES .....................................................................14
REVISION HISTORY ...............................................15

SkyAzúl, Equipment Solutions

2

www.skyazul.com 

Summary of Contents for GS320
















Reviews: