LSI LASTEM Heat Shield, Quick User Manual

Page: 7 / 12

7
HS MANAGER
HS Manager is a PC tool used to download the stored data and perform data analysis.
Installation
The software can be found on the MW6501 USB pen drive and on the website www.lsi-
lastem.com.
Run Setup and follow its instructions.
During the first run, the program asks to install a new Heat Shield unit.
1. Connect Heat Shield MASTER to PC via RS-
232 port (8) using its cable and USB adapter.
2. Go to “Communication” and select the PC port
where the USB adapter is connected.
3. Select “Go” until the instrument is found. Select
“end” to terminate this procedure.
To detect the PC port where the USB
adapter is connected, go to (Windows)
Control Panel Device Manager Univer-
sal Serial bus
controller and
look for the
COM number
of the USB se-
rial port.
Prior to start, install the USB/RS-232 adapter
driver in your PC.
Data download
While Heat Shield MASTER is connected to PC:
•
Select "Communications" from Tools.
•
Select the instrument serial number and press .
•
Select the data limits and select <Download>.
•
When finish press .
Data display
•
From the browser, expand “Database”, select instru-
ment serial number.
•
Select the survey of interest.
•
Left key on the mouse to select “Show Data”.
•
Select data limits and press .