LSI LASTEM Heat Shield, Quick User Manual

Page: 4 / 12

4
Use
and to scroll the group to the next/previous one. and scroll vertically each
group.
Data logging
To start data logging go to measurements screen
and press + . Press + to stop data
logging.
Go to SURVEY for more information.
Status bar
It contains some Heat Shield working information:
where:
a : storing in progress.
nn : survey number.
ss:mm : can have the following meanings:
- on programmed survey, it is the time to reach the starting time of the survey
( s =” - “).
- on programmed survey, during survey, it is time to reach the end of the
survey ( s =” - “).
- During survey, it is the time from the beginning of the survey. It is available
only if survey end has not been programmed ( s =”+“).
Eee : number of errors.
ru : radio signal with battery level. “ - “ radio on, “1” receiving data from SATELLITE
unit 1 , “ 2 ” r eceiving data from SATELLITE unit 2. It does not appear with mode
set to WBGT 1 amb (no SATELLITE unit used) and in models without the in-
ternal radio module.
LI : shows alternatively the battery level (B) and Memory status (M).
100%: battery at full charge/full memory; 0%: low battery/memory empty;
other levels indicated: 80%, 60%, 40%, 20%.