2022-06-25 Page 8 of 14
ΔE setting
Set the formula of ΔE calculation and threshold of QC testing.
Save standard
Users can enter the name of the color and save the standard color in “My Colors”.
Input standard
Users can input Lab or LCh values as the standard color.
Add standard color
Standard color addition is to add the measured color in "My Colors" or the color in the standard color
charts as the standard color. After clicking the "Add Standard" button, jump to the "add color" interface,
open the folder, click the color you want to add and then use the selected color as the standard color and
return to the measurement interface.
Add sample color
Sample color addition is to add the measured color in the history or the color in the standard color chart
as the sample color. The operation of adding sample color is the same as adding standard color above.
5. Menu bar
In the measurement interface, click the menu bar "
" in the upper left corner, the menu bar as
shown in the figure below appears, corresponding to different parameter settings.
