2022-06-25 Page 5 of 14
the factory for inspection and repair.
Skip calibration
The colorimeter skips the calibration operation and enters the measurement interface. When the
colorimeter has not been used for a long time, it is recommended to calibrate.
4. Measurement
After the App is successfully connected to the colorimeter, enter the main measurement interface. There
are two measurement modes: "Color Scan" and "Color Compare". After the App is opened, the default
mode is "Color Scan", there are two measurement switch buttons at the bottom of the main interface.
The font of the button turns blue when selected. The current measurement mode, battery power,
historical records, model and connection status are displayed on the top information bar.
Battery life
Display the current power of the colorimeter. When the battery is low, charge it in time.
History records
Click the history icon, if it is the color measurement interface, enter the "My Colors" interface; if it is
the color compare interface, and enter the "Compare History" interface.
Connection status
Display the connection status of the colorimeter. If the App is connected to the colorimeter, the
corresponding model will be displayed; if not, it will prompt that the device is disconnected and the
model display will be blank.
4.1 Color measurement
After the colorimeter is connected, it will enter the color measurement interface. Click the "Scan" button
on the App or short press the button and the colorimeter will show the data to the App after measuring.
The display interface after color measurement including the following parameters:
Color of the test sample:
After the measurement, the measurement button area will display the
color value of the test sample and the value type can be set by the user.
Matching colors:
According to the color chart selected by the user, the closest three color codes
are matched and displayed.
