The alarm is ON."
To check the alarm time, press the 4 o'clock button while the watch is in normal running mode.
The watch will state the current alarm time and whether or not the alarm is on or off.
Remarks:
The alarm will Beep for 30 seconds. You can turn off the alarm with a push of any button.
The alarm is a daily alarm. To turn off the daily alarm, follow the Alarm On/Off instructions below
Alarm On/Off
Hold 4 o clock button for at least 5 seconds while the watch is in normal running mode.
Once the watch speaks, press the 4 o'clock button once.
You will hear the watch say “Alarm On/Off, press 2 o'clock button to set." Press 2 o'clock button.
The watch will speak, “Press 2 o'clock button to On/Off, press 4 o’clock button to confirm."
Each press of 2 o'clock button will toggle between “alarm on” and “alarm off." Once the watch
speaks the correct, option, press the 4 o'clock button to confirm.
Hourly Announcement (Chime) On/Off
When the chime in ON, the watch will announce the hour every hour from 6AM to 10PM.
Hold 4 o'clock button for at least 5 seconds while the watch is in normal running mode.
Once the watch speaks, press the 4 o'clock button twice until you hear “Chime On/Off, press 2
o'clock button to set."
Press 2 o’clock button.
Each press of 2 o'clock button will toggle between “chime on” and "chime off." Once the watch
speaks the correct option, press the 4 o'clock button to confirm.
The watch will then confirm.
TROUBLESHOOTING:
Your watch is a very delicate and precise instrument. Although uncommon, sometimes hard
knocks or vibrations can cause the hands to move irregularly, and therefore display the incorrect
time, although the internal clock is keeping accurate time. You may notice this if the time
announcement does not match with the position of hands. Then you need to reset watch hands
by the following procedures.
Reset Watch Hands
Wait until the second hand just stop at 12 o'clock and pull out the middle crown immediately so
that the second hand stops at 12 o'clock position.
Turn the crown to set Hour and Minute hands to 12 o'clock.
After all hands stop at 12:00:00, holding 2 o'clock button for 5 seconds and then, Push-in the
crown.
The watch hands will spin to match the internal time and resume normal running when the time
matching is finished. When the watch resumes normal running, the watch hands match with the
internal time-keeping of the watch.
Watch Stops at 12 o'clock and will not speak
When battery is low, the watch hands will stop and talking function is terminated. The battery
needs to be changed according to the “Battery Change “procedures.
Watch Not Receiving Time Signal
Reason for not being able to receive the Time Signal include:
-Being outside of the USA signal area.
-Being in a congested area, such as a large urban area with lots of steel buildings
-Metal objects blocking the radio signal
-Interference from a computer monitor or TV
Ensure that the watch is left by a window, as this gives the best reception. You may have to try
different windows in the house to see which is best. You can test this using the reception status
test described earlier. Please note that reception is always better at night. If your watch is unable
