button to confirm your selection. Press 2 o’clock button repeatedly to scroll through the time zone
choices. The choices are as follows:
USA, Pacific
USA, Mountain,
USA, Central, or,
USA, Eastern
Once you have selected your correct time zone, press the 4 o’clock to confirm your selection.
After confirmation, the watch will automatically adjust to the correct time. Please wait while the
hands adjust themselves. The watch will resume to normal operation once the time has been set.
The watch will synchronize with the local atomic clock automatically overnight starting from 3AM.
Please make sure the correct time zone has been set or the watch will not be able to pick up the
local signal.
Manual signal reception
Note: the watch must be set to the right time zone before you do a manual signal reception. After
the time zone is set, proceed with the following instructions.
Place the watch on a table nearby a window when you need a manual signal reception. Please
pay attention to the position of the watch. The watch must be put on the table according to the
position shown in the pictures below or the watch will not be able to pick up the signal.
While the watch is in normal running mode,
Hold 2 o'clock button down for at least 3 seconds. The second hand will spin very fast to the 12:00
position. Once the second hand stops, release the 2 o'clock button.
The watch takes about 5-8 minutes to pick up the radio signal. Wait until the watch has finished
the signal receiving procedure.
After signal reception, the watch will resume normal mode.
To check signal status, push 2 o'clock button 3 times after the watch resumes normal running
mode. The watch will speak the following commands upon each press of the 2 o'clock button:
“The time is (current time)."
“Today is (today's date).”
“(Country) time updated" or "Country time not updated."
If the reception was successful, the watch says “USA +(time zone name) time updated." If the
reception failed, the watch says “USA +(time zone name) time not updated.”
If manual signal reception failed, try updating the watch in an area with less interference, such as
a window far away from microwaves, routers, or telephones.
Note: signal reception is always better at night.
Set daily alarm
Hold 4 o'clock button for at least 5 seconds while the watch is in normal running mode.
The watch will instruct you "set alarm, press 2 o'clock button to set."
Press 2 o'clock button.
The watch will instruct you to "Press 2 o'clock button to set hour, 4 o'clock button to confirm.”
Press the 2 o'clock button repeatedly until the watch speaks the correct hour.
Press the 4 o'clock button to set the hour.
Once the hour is confirmed, the watch will instruct you to hit the 2 o'clock button to set the correct
minute.
Press the 2 o'clock button repeatedly until the watch speaks the correct minute.
Press the 4 o'clock button to set the minutes.
Once the hour and minutes have been set, the watch will say, “Confirm the alarm time is (time).
