Leading Solution
LS TRACTOR
4 - ADJUSTMENT
4-2. STOPPER BOLT ADJUSTMENT (38mm -> 41mm)
WARNING
Maintenance hazard!
Before performing any maintenance or inspection:
-position machine on a firm, level surface
-turn off the engine
-remove the ignition key
-secure the machine (wheels chocked)
-disconnect the wiring
(unless instructed otherwise)
Failure to comply could result in death or serious injury.
1. Measure the length of the stopper bolt.
38mm (1.50 inch)
8
2. Loosen the M12 locking nut.
3. Loosen the stopper bolt so that the length of the
stopper bolt is 41mm. (1.61inch)
38mm
41mm
ENG