Leading Solution
LS TRACTOR
3 - GENERAL INFORMATION
3
- GENERAL INFORMATION
Basic instructions
PLEASE READ THE COMPLETE INSTRUCTIONS BEFORE STARTING ASSEMBLY!
References to right and left are determined by standing at the rear of the machine and facing the direction of travel.
NOTE: When referring to the instructions for callout references, the numeric (example: (1)) refers to item (1) in the
kit contents bill of materials. The letter (example: (A)) refers to the component on the unit, not a component in the kit
contents bill of materials.
NOTE: Using the hardware torque chart, torque all hardware to the specified torque unless otherwise specified
within
the instructions.
NOTE: Using the hydraulic fitting torque chart, torque all fittings to the specified torque unless otherwise specified
within the instructions.
NOTICE: Do not tighten the hardware until instructed to in the assembly instructions.
NOTICE: Be sure to use the hardware specified when using tapped holes as trying to install a metric bolt in an inch
thread or an inch bolt in a metric thread will damage the threads.
NOTE: Install flat washers over all slotted holes unless truss-head or carriage bolts are used. Install a lock washer
on all bolts unless a jam nut or self-locking nut is specified.
NOTE: Install special hardened washers where specified.
5
ENG
