LS ELECTRIC SV-iS7 Series, User Manual

Page: 295 / 491

Learning Advanced Features
278
8.36 Traverse Operation
The traverse operation is used to periodically change the motor rotation. In its application as a
winder, the traverse operation ensures that the thread or wire is evenly wound on a spindle
without tangles.
Group Code Name LCD Display Parameter Setting Setting Range Unit
APP
01
Applied function
selection
App Mode 1 Traverse 0 – 4 -
08
Traverse operating
range
Trv Amplit % - 0.0 0 – 20 %
09
Traverse scramble
magnitude
Trv Scramb % - 0.0 0 – 50 %
10
Traverse
acceleration time
Trv Acc Time - 2.0 0.1 – 600.0 Sec
11
Traverse
deceleration time
Trv Dec Time - 3.0 0.1 – 600.0 Sec
12
Traverse offset
upper limit
Trv Offset Hi - 0.0 0 – 20.0 %
13
Traverse offset
lower limit
Trv Offset Lo - 0.0 0 – 20.0 %
IN 65 – 75
Px terminal
configuration
Px Define
(Px: P1
– P8
[optional:
P9
– P11])
27
Trv Offset
Lo
- -
28 Trv Offset Hi - -
Traverse Operation Details
Code Description
APP-01 APP Mode
Set APP- 01 to “1 (Traverse)”. Parameters for the traverse operation
become visible.
Setting Function mode
0
None
1 Traverse
2 Proc PID
3 Reserved
4 Auto Sequence