LS ELECTRIC SV-iS7 Series, User Manual

Page: 211 / 491

Basic Functions
194
7.20 Multi-function Input Terminal Control
Filter time constants and the type of multi-function input terminals can be configured to
improve the response of the input terminals.
Group Code Name LCD Display Parameter Setting Setting Range Unit
IN
85
Multi-function input
terminal On filter
DI On Delay 0 0 – 10000 ms
86
Multi-function input
terminal Off filter
DI Off Delay 0 0 – 10000 ms
87
Multi-function input
terminal selection
DI NC/NO Sel 0000 0000* - -
90
Multi-function input
terminal status
DI Status 0000 0000* - -
* From the last bit to the first, the bits are for multi-purpose inputs P1 – P8 (the last bit is for input 1,
and the first bit is for input 8).
Multi-function Input Terminal Control Setting Details
Code Description
IN-85 DI On Delay,
IN-86 DI Off Delay When the terminal receives an On or Off input signal, it is recognized as an On
or Off signal after the set delay time has elapsed.
IN-87 DI NC/
NO Sel
Selects terminal contact types for each input terminal. The position of the dot
corresponds to the segment that is on as shown in the table below. With the
bottom segment on, it indicates that the terminal is configured as an A
terminal (Normally Open) contact. With the top segment on, it indicates that
the terminal is configured as a B terminal (Normally Closed) contact. Terminals
are numbered P1
– P8, from right to left.
Type B terminal status (Normally Closed) A terminal status (Normally Open)
Keypad
IN-90 DI Status
Displays the configuration of each contact. When a segment is configured as
an A terminal at DRV-87, the On condition is indicated by the top segment
turning on. The Off condition is indicated when the bottom segment is turned
on. When contacts are configured as B terminals, the segment dots behave
conversely. Terminals are numbered P1
– P8, from right to left.
Type A terminal setting (On) A terminal setting (Off)
Keypad