LRT HOME ESSENTIAL 22, Operating Instructions / Safety Instructions, Page: 13 / 40

The charging station must always be installed and secured in accordance with
local safety regulations and legal requirements. The installation and repair of
the charging station may only be carried out by qualifi ed electricians. Failure to
comply with this requirement may result in danger to the life of the user of the
charging station and considerable damage may be to the charging station, the
electric vehicle and the environment. In addition, the manufacturer‘s warranty is
voided in the event of improper installation, maintenance and repair work.
For installation, drill three 35mm deep holes in the wall and insert the dowels.
Attach the charging station to the wall by using the M5x30 screws from the in-
side of the charging station through the holes provided into the wall.
The power line must be connected to the RCCB type B and the ground cable
connected to the yellow-green terminal.
TECHNICAL
DATA
INSTALLATION
03
04
Alternating current 3P + N + PE
Supply voltage AC 400~ ±10%
Rated current 32 A
Frequency 50 – 60 Hz
Cable length 5 m
Charging plug Typ 2 according to IEC 62196
Weight 5,6 Kg
Protection class IP55, IK10
Ambient temperature -40°C – 45°C
Storage temperature -40°C – 70°C
Max. Humidity 95% non condensing
Residual current circuit breaker Typ B
4