Long Range Systems
24
Cleaning & Charging Instructions For LRS
Paging Equipment
Cleaning:
LRS pagers are made from industrial-strength, polycarbonate material.
However, this material is susceptible to hairline cracking if non-approved
cleaners are used. When cleaning LRS pagers, we recommend only using
ISOPROPYL ALCOHOL-BASED CLEANERS.
To clean the equipment:
1. Take a clean cloth and an isopropyl-alcohol based cleaner
2. Soak the clean cloth with the isopropyl alcohol cleaner
3. Wipe down the pagers or equipment.
Cleaning equipment with any other non-approved cleaners can weaken
plastic and cause hairline cracks. Pagers and equipment that are cleaned
with unapproved cleaners and suffer cracking will not be covered under
warranty.
Do not submerge any LRS paging equipment in any type of liquid as this
will also damage the equipment and is not covered under the standard
warranty.
Charging:
Place rechargeable pagers on the charger and let them charge for 8 hours
prior to first use.
Rechargeable pagers should be kept on charge even during extremely
long periods of inactivity.
Only 10 VAC power supplies should be used with LRS chargers and trans-
mitters. DC power supplies will cause damage to equipment that is not
covered under the standard warranty.
Should you have any questions, please contact the LRS Customer Serv-
ice Department at 800.437.4996.
Summary of Contents for T7503
Page 1: ...800 437 4996 www pager net ...
Page 2: ......
Page 4: ......
Page 31: ...27 T7503 User Manual ...
