Repeat Delay
When using a repeater, it may be necessary to add a delay between pages when paging multiple pagers to
allow the repeater time to repeat the signal and detect the next one. To add repeat delay:
1. Press SETUP
2. Enter Access Code
3. Press 1) System
4. Press F2 (Dn) until the display shows 2: Repeat Delay
5. Press 3 (3: Repeat Delay)
6. Select F1 (Yes) to enable or F4 (No) to disable
ID Span
In very large systems up to 9999 Guest pagers can be paged. To do this, ID Span is required. This function
disables normal System ID functions except for Staff Paging and allows the programming of Guest Pagers
from 1000 to 9999.
To use ID Span:
1. Press SETUP
2. Enter Access Code
3. Press 3) Other
4. Press 2) ID Span
5. Select F1 (ON) to enable or F4 (OFF) to disable
POCSAG Button Enable/Disable
The buttons on an Alpha Pager can be enabled or disabled.
1. Press Setup and enter Access Code
2. Press 1 for 1) System
3. Press F2 (Dn)
4. Press 2 for 2) POCSAG
5. Press 2 for 2) Btns Enabled
6. Press F1 (Yes) to enable Alpha Pager buttons, or press F4 (No) to disable Alpha Pager buttons
Guest Message
The Guest Message is the default preset message sent to Guest Alpha Pagers. To change the message.
1. Press Setup and enter Access Code
2. Press 1 for 1) System
3. Press F2 (Dn)
4. Press 2 for 2) POCSAG
5. Press 3 for 3) Guest Message
6. Enter a number 00-99 for selected preset message
Note:
See pg. 14 for Creating Alphanumeric Messages
Long Range Systems
16
Freedom User Manual
