BASIC POWER CONNECTIONS
1. Determine where monitor will be mounted.
2. Route AC source power to the monitor
3. Select the “To Go” parking area where the camera will be mounted.
4. Route 24 VAC source power to the camera housing fan and heater.
• Locate the wire at the camera housing marked 24VAC/15VDC.
• Splice a connecting wire to the 24VAC/15VDC power supply
• Splice the wire to the 24VAC/15VDC power supply
5. Route 24 VAC source power to the camera.
• Locate the wires at the camera housing marked 24VAC/15VDC.
• Splice connecting wires to the 24VAC/15VDC power supply
• Splice the wires to the 24VAC/15VDC connections at the power supply.
Note:
The 24VAC Power Supply provided for camera must be connected positive-positive, neg-
ative-negative.
NOTICES:
• The Surge protector must be mounted near the MONITOR and all items shown are connected to it!
• This is a touch screen monitor it must be accessible to the users.
O
FF
O
N
Power Supplies
Surge Protector
Splice
Monitor
Camera
Heater/Fan
Splice
Extension Wire Suppied
by Installer
24VAC/15VDC
Parking Spaces
Long Range Systems
4
CurbAlert User Manual
