LRS CurbAlert Install Manual Download Page 23

Warranty

Long Range Systems, Inc. warrants this product against any defects that are due to faulty material or workmanship for
a two-year period after the original date of consumer purchase.  This warranty does not include damage to the product
resulting from accident, misuse or improper electrical connection. If this product should become defective within the war-
ranty period, we will repair or replace it with an equivalent product, free of charge. LRS will return your product via UPS
ground shipping. All warranty claims must be initiated through our customer service department.

Copyright © August 2009, Long Range Systems, Inc.  All Rights Reserved

This manual contains proprietary information of Long Range Systems, Inc. (LRS) and is intended for use only by its em-
ployees or customers.  None of the material contained herein may be copied, reproduced, republished, downloaded, dis-
played,  posted,  or  transmitted  in  any  form  or  by  any  means,  including  but  not  limited  to,  electronic,  mechanical,
photocopying, recording, or otherwise without the prior written permission of LRS.  Additional copies of this manual may
be obtained by contacting LRS.

Screen displays, keyboard layouts, hardware descriptions, or software are proprietary to LRS and are subject to copy-
right and other intellectual property rights of LRS and shall be treated in accordance with the previous paragraph.

All attempts have been made to make the information in this document complete and accurate.  LRS is not responsible
for any direct or indirect damages or loss of business resulting from inaccuracies or omissions.  Specifications and other
information contained within this document are subject to change without notice.

Long Range Systems, Inc. reserves the right to make changes without further notice to any products herein. LRS, Inc.
makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor
does LRS, Inc. assume any liability arising out of the application or use of any product or circuit, and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be
provided in LRS, Inc. data sheets and/or specifications can and do vary in different applications and actual performance
may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by
customer’s technical experts. LRS, Inc. products are not designed, intended, or authorized for use as components in sys-
tems intended to support or sustain life, or for any other application in which the failure of the LRS, Inc. product could
create a situation where personal injury or death may occur. Should Buyer purchase or use LRS, Inc. products for any
such unintended or unauthorized application, Buyer shall indemnify and hold LRS, Inc. and its officers, employees, sub-
sidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unau-
thorized use, even if such claim alleges that LRS, Inc. was negligent regarding the design or manufacture of the part, de-
vice or system.

EU DECLARATION OF CONFORMITY

We, Long Range Systems hereby declare under our sole responsibility that the CurbAlert paging on-site pagers comply
with the essential requirements in the European RE&TTE Directive 1999/5/EC of the European Parliament of the Council
of 9 March 1999 on radio equipment and telecommunication terminal equipment and the mutual recognition of their con-
formity.  The following standards were utilized:

ETS 300 224: 1998

EN 301 489-2: 2002

EN61000-3-2: 1998

EN 61000-3-3: 1995

EN 60950: 1992 with A1, A2, & A3

Long Range Systems

22

CurbAlert User Manual

XU-0044 110209

Long Range Systems UK Ltd | Link House | Leek Road | Milton | Stoke on Trent | Staffordshire | ST2 7AH | 01782 537000
www.lrspagers.co.uk | www.pagers.co | www.hospitalpagers.co.uk

Summary of Contents for CurbAlert
























Reviews: