DRUCK TEMPERATUR
&
Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY •
www.druck-temperatur.de
Tel. +49 (0) 7121-90920-0 •
[email protected] • E-Mail from outside Germany: [email protected]
E-Mail from Germany: DT
MANUAL
LR-
Cal
1000 Referenzthermometer
LRT
Precision reference thermometer
31
„Measuring mode“ - Automa�c measurement screen
fig. C
fig. D
(48)
Shows the measured temperature value.
(49)
Shows the remaining �me un�l the automa�c measurement
finishes.
(50)
Opens a screen for selec�ng the recording dura�on (see
fig. ).
D
(51)
Starts recording. The key turns red once recording has
started.
NOTE: During an ac�ve recording it is not possible to switch
off the measuring device with the On/Off key. Automa�c
switch-off is also deac�vated. First stop the recording by
pressing bu�on (52) and then turn off the device.
(52)
Stops the current recording. The detected values are
automa�cally saved to the current measuring project.
(53)
Pauses the current recording. Bu�on (51) con�nues to be
illuminated in red. Press bu�on (53) again to resume
recording.
Carrying out a measurement
Note:
Note that moving from a cold area to a warm area can lead to
condensa�on forming on the device‘s circuit board. This physical and
unavoidable effect can falsify the measurement. In this case, the
colour display shows either no measured values or they are incorrect.
Wait a few minutes un�l the device has become adjusted to the
changed condi�ons before carrying out a measurement.
Upon connec�on of a sensor the device changes into the measuring
mode. The corresponding screen is displayed and the measurement
begins.
48
49
50
51
53
52