manualshive.com logo in svg

LPS PP-2/110 Series, Installation Instructions

Share
Download
LPS PP-2/110 Series Installation Instructions Download Page 3

    

Important Note: 

 

 

.   All  LPS      Products must be connected to Power Earth,

     directly  or indirectly.

 .   All connecting leads must be as short & as straight as          

     possible. The SPD must be less than 300mm away from  

     the equipment to be protected.

SIDE VIEW

∆

∆

∆

∆

20mm

51mm

115mm

29mm

PP - 2 / 110

LINE

EQUIP

25mm 

 

                 45mm                                          25mm

 115mm 

38mm

+          G           -

+          G          -

Summary of Contents for PP-2/110 Series

Page 1: ...rm 2 Turn Off power supply to all equipment to be protected 3 Verify that the equipment chassis is earthed 4 Add a 2 5mm green ground wire to G of equipment terminal of SPD and connect the other end with cable lug to the metal chassis equipment by i Removing a screw on the metal chassis that is within reach of the ground wire ii Removing any paint around the screw hole iii Tightening screw with gr...

Page 2: ...in step 6 7 10 Apply power to the now protected equipment Trouble shooting 1 Check to see if your equipment is turned on 2 Inspect all connections 3 Remove and by pass SPD and verify proper operation If the system comes back on line without the SPD installed chances are the SPD has been damaged by excessive surge Replace the SPD as soon as possible with a new SPD It is not advisable to run the sys...

Page 3: ...to Power Earth directly or indirectly All connecting leads must be as short as straight as possible The SPD must be less than 300mm away from the equipment to be protected SIDE VIEW 20mm 51mm 115mm 29mm PP 2 110 LINE EQUIP 25mm 45mm 25mm 115mm 38mm G G ...

Page 4: ......

Reviews:

No comments

Brands by name

Popular brands

Load more brands