Installation
CAUTION:
Before installing, make sure that the circuit is deactivated.
ADJUSTABLE BRACKET STYLE MOUNTING
1.
Install fixture to the surface using the 3/8” inch hole that is located on each adjustable bracket mount.
(see below)
2.
Position the fixture to desired angle, then tighten the two positioning bolts on each bracket to secure
the angle.
3.
Install the provided safety cable through one of the loops that is located on the backside of the
housing.
4.
Power supply connections must be three conductor, #14 type cable, rated min. 90 deg. C
5.
Wire fixture through desired 3/4” NPT hub, then install the provided 3/4” plug in the unused hub.
Note: Lubricate all threads with petroleum.
6.
Connect internal wires per wiring diagram on the LED Driver, according to NEC requirements.
Product Dimensions
Dimensions
(Inches/mm)
A
B
C
D
E
L1: 2FT
27.6”
(701.04mm)
26”
(660.4mm)
6.3” (160.02mm)
6.19” (157.22mm)
24.85” (631.19mm)
L2: 4FT
51.56” (1310.6mm)
50”
(1270mm)
6.3” (160.02mm)
6.19” (157.22mm)
48.81” (1239.77mm)
LDPI, Inc.
| (
800
)
-854-0021
|
www.ldpi-inc.com
|
D-1341 v08.29.19
