9
SEAT HEIGHT
ADJUSTMENT AND OPERATING
INSTRUCTIONS
1. Lay the chair on its side.
2. Using a
5
⁄
8
" wrench and an
11
/
16
"
wrench, unscrew the hex nut on
the inside of the leg support, then
remove the washers and bolt.
If the leg support seems stuck,
apply a gentle twist to release it.
4. Repeat this operation on the other
side of the chair.
Adjust the height (from 17
"
to 20
"
) based on the length of the user’s
lower leg. It is important that their hips, knees and ankles are at
90 degrees. The feet must be able to make good contact with the floor.
3. Place it at the desired height, and
replace the bolt, washers and nut.
Tighten firmly.
Summary of Contents for Thera-Glide oasis
Page 22: ...22 VUE CLAT E EXPLODED VIEW...
Page 23: ...23...
