pg. 56
In order to designate the average number, please press Avg Number (On). The
average value will appear when each sweep is over. Avg Number (Off) inactivates
the average measurement.
MEAS SETUP >> Avg Number
▪
OBW span
It sets the span of the analyzer on the occupied bandwidth measurement.
MEAS SETUP >> OBW Span
▪
Occ BW % Pwr
It changes the ratio of signal power used for determining the occupied
bandwidth.
MEAS SETUP >> Occ BW % Pwr
5-11. MEASURE
It performs diverse measurement functions including the Adjacent Channel Power,
Channel Power, and Occupied Bandwidth
■
Meas Off
It turns off the measurement function.
MEASURE >> Meas Off
■
ACP
It calculates power in the center and adjacent channel of a signal. A marker point
can be established as a measurement set-up menu while ACP is selected.
If you press Meas Setup while ACP is selected, you can set the adjacent channel
power measurement parameter. If you press Meas Control when ACP is selected,
the measurement can be temporarily suspended or resumed or makes conversion
between continuous or single modes.
MEASURE >> ACP
Summary of Contents for LPT-6000
