Lowry LDH2002, Manual

Page: 8 / 22

When using the dehumidifier for the first time, run the unit in
continuous mode for 24 hours
Turning the Unit On
Remove all packaging and plug the unit into a socket.
Ensure the water drawer is correctly positioned and the drain plug is
fully inserted into the drain hose outlet on the back of the unit.
Press the Power button to turn the dehumidifier on and off. The light
next to the Power button will display green when the unit is turned on.
When the unit is first switched on, the display shows the actual room
% humidity level (within 5% accuracy).
The humidity level can be set using the instructions for “Setting the
Humidity”.
Continuous Extraction Mode
In Continuous Extraction Mode, the unit will run at a high extraction
rate until the water drawer reaches the max fill level.
Press the Mode button until the light next to “Cont.” (Continuous
Extraction) is illuminated green.
Press the Mode button again twice to cancel the continuous extraction.
Note: The humidity cannot be set when the unit is operating in
Continuous Mode.
Smart Dehumidifying Mode
In the smart dehumidifying mode, the unit will automatically control
room humidity in a comfortable range 45%~55% according to the room
temperature.
Press the Mode button until the light next to “SMD.” (Smart
Dehumidifying Mode) is illuminated green.
Press the Mode button again once to cancel the Smart
Dehumidification Mode.
Note: The humidity cannot be set when the unit is operating in
Continuous Mode.
USING YOUR DEHUMIDIFIER
Page 8