Lowry LDH2002, Manual

Page: 13 / 22

There are two ways to remove collected water:
Collection in the Water Drawer
When the water drawer is full, the unit will beep 8 times and will
automatically stop running. The Full indicator light will flash and the
display will show “P2”.
Slowly pull out the drawer. Grip the left and right handles securely,
and carefully pull out straight so water does not spill. Do not put the
drawer down because the bottom of the drawer is uneven.
Empty the water and replace the drawer. The drawer must be
correctly inserted for the dehumidifier to restart operation.
Continuous Draining
Water can be automatically emptied into a floor drain by attaching the
unit with a 13.5mm hose (not supplied).
Remove the rubber bung from the Drain Hose Outlet on the back of
the unit.
Insert the hose into the Drain Hose Outlet in the back of the unit as
shown below.
EMPTYING YOUR DEHUMIDIFIER
Lead the water hose to a suitable drainage
facility. The drainage facility should be lower
than the drain outlet of the unit.
Be sure to run the water hose sloping
downward and let the water to flow out
smoothly.
NOTE: When the continuous drain feature is
not being used, remove the drain hose from
the outlet and attach the rubber plug back to
the drain outlet.
Page 13