Lowry LDH1001, Manual

Page: 8 / 22

When using the dehumidifier for the first time, run the unit in
continuous mode for 24 hours
Turning the Unit On
Remove all packaging and plug the unit into a socket.
Ensure the water drawer is correctly positioned, the drain plug is in
place in the back of the unit if you are using the drawer to collect the
water.
Press the Power button to turn the dehumidifier on and off. The light
next to the Power button will display green when the unit is turned on.
When the unit is first switched on, the display shows the actual room
% humidity level (within 5% accuracy).
The humidity level can be set using the instructions for “Setting the
Humidity”.
Continuous Extraction Mode
For maximum extraction rate, the Continuous Extraction mode should
be used.
Press the Continuous Extraction button on the control panel. The light
next to the Continuous Extraction button will illuminate green when
this mode is selected.
The unit will continue to run at the maximum extraction rate until the
water drawer reaches the max fill level.
Press the Continuous Extraction button again to cancel the continuous
extraction.
Note: The humidity cannot be set when the unit is operating in
Continuous Mode
USING YOUR DEHUMIDIFIER
Page 8