3
Secure unit to the dash using "U" bracket as shown.
The bracket is designed to secure the unit to a dash with a thickness of
2 mm. If your dash is thicker than 2 mm, the "U" bracket will be too
long. Simply place washers or spacers between the unit and the bracket
until you can tighten the wing nuts and secure the unit it place.
Once the unit is in place, you need to connect it to a power supply, to
the speaker (provided) and to the transducer. All of these elements are
described in the following paragraphs. Refer to the following
illustration as needed.
LCF-1440 system components installed, including power connections.
Pod transducer
12 volt
battery
Flasher unit
(side view)
Power/trans-
ducer cable
Speaker cable
temp
sensor
Black wires
Red wires
Connect white wire
to "Lights" switch
on your boat's
instrument panel.
Speaker
2-amp fuse
Black wire
Summary of Contents for LCF-1440
Page 4: ...ii Notes ...
