Lowrance HDS Gen3 Polaris, Installation Manual

Page: 32 / 44

30 |
Software setup | HDS Gen3 Polaris Installation Manual
Video In configuration
Press the menu key when on the video page or
panel to highlight the setup dialogue.
Enable PAL or NTSC depending on the video ouput
standard of the selected camera.
You can optimize the video display by adjusting the
video image settings (brightness, saturation, etc.).
The settings are applied individually for each video
source.
Mirror image may be applied where the camera is
providing a rear view, and the user wishes to see
objects as they would appear in a vehicle rearview
mirror, ie, on the same side as they actually are.
Software updates and data backup
From time to time Lowrance releases software updates to its
existing products. Updates are created for a variety of reasons; to
add or improve features, to add support for new external devices, or
to fix software bugs.
Updates can be found on the Lowrance website: http://www.
lowrance.com
The HDS Gen3 Polaris may be used to apply software updates to
itself, and to supported NMEA 2000 and ethernet devices, with files
read off a microSD card.
Before initiating an update to the HDS Gen3 Polaris itself, be sure to
back up any potentially valuable user data.
Backing up and Importing user data
There are two files that can be backed up that relate to user changes
made to the system:
•
Waypoints, Routes, and Trails database
• Settings database
(includes preferences such as unit settings,
custom pages, data overlays, and Czone configuration files)
Insert a microSD card in to unit as storage location for backup data.