Lowrance GlobalMap 7200C, Operation Instructions Manual

Page: 39 / 168

31
out of the box with the factory default settings. But, if you want to
learn about the various options, see Sec. 5,
System Setup and GPS
Setup Options .
You can access the Main Menu from any of the three Page screens by
pressing
MENU
|
MENU
. To clear the menu screen and return to the page
display, press
EXIT
.
Main Menu.
The Main Menu commands and their functions are:
Screen command: changes the contrast or brightness of the screen.
Sounds command: enables or disables the sounds for key strokes and
alarms and sets the alarm style.
Transparency command: adjusts the level of transparency for menus.
Alarms command: turns GPS alarms on or off and changes alarm
thresholds.
Route Planning command: used to plan, view or navigate a route.
My Trails command: shows, hides, creates and deletes plot trails. Also
used to navigate or backtrack a trail.
Cancel Navigation command: turns off the various navigation com-
mands. Used to stop navigating after you have reached your destina-
tion waypoint, Point of Interest or map cursor location; or after you
reach the end of a route or trail.
GPS Setup command: sets various GPS receiver options.
System Setup command: sets general configuration options.
Sun/Moon Calculations command: finds the rising and setting time
of the sun and the moon.