manualshive.com logo in svg

Lowrance GlobalMap 7000C, Operation Instructions Manual

Share
Download
Lowrance GlobalMap 7000C Operation Instructions Manual Download Page 89

83

you can select the boxed "

C

" icon and it becomes an animated arrow

with a pop-up name box. An example is displayed in the following figure.

To view Tidal Current information:

1. Use the arrow keys to move the cursor over a Tidal Current Station
icon. When selected, a pop-up name box appears.

2. Press 

WPT

 to display the Tidal Current Information screen.

Navionics chart showing Tidal Current Station icon selected by cur-

sor. In this example, the tidal current is in flood but it's about to enter

the slack water stage. The current is flowing to the west at 0.1 mph.

  

Current Information screen.

The Tidal Current Information screen displays daily tidal current data
for this station on this date at the present time. The graph at the top of
the screen is an approximate view of the flood and ebb pattern for the
day, from midnight (MN), to noon (NN) to midnight (MN). The velocity
scale at the top left side of the graph changes dynamically based upon
the maximum velocity of the current for that day.

Cursor lines

Tidal Current
Station icon
in animated
mode

Pop-up
name box

Summary of Contents for GlobalMap 7000C

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands