26
2. Highlight
B
US
S
ETUP
and press
ENTER
, which will open the Bus
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the storage device with the device name you want to reset and
press
ENTER
. The Device Configuration menu will appear with the
Device Name dialog box highlighted.
4. Press
ENTER
. Depress the left arrow key until the device name
disappears. Press
ENTER
, then press
EXIT
to return to the NMEA 2000
menu.
5. Highlight the device and press
ENTER
. The Device Configuration
menu will open. The device name will be reset to its default setting.
Press
EXIT
repeatedly to return to the main display.
Restore Defaults
Located on the Advanced Options menu, the Restore Defaults
command allows you to reset EP-85R Storage Device settings to factory
defaults.
NOTE:
Using the Restore Defaults command will clear your engine-tank
configuration. After restoring default settings, access the Bus Setup
menu to re-enter the configuration. The Restore Defaults command
will not affect the configuration or calibration of other devices on
the network.
To restore default settings:
1. Press
MENU
twice, select
NMEA
2000
or
N
ETWORKING
and press
ENTER
. A
menu will appear with five options: Bus Setup, Fuel Management,
NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
B
US
S
ETUP
and press
ENTER
, which will open the Bus
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the storage device and press
ENTER
. The Device Configuration
menu will appear.
4. Highlight
A
DVANCED
O
PTIONS
and press
ENTER
.
5. Select
R
ESTORE
D
EFAULTS
and press
ENTER
. The following message will
appear:
Are you sure you wish to change this device's configuration?
6. Highlight
Y
ES
and press
ENTER
. Press
EXIT
repeatedly to return to
the main display.
Summary of Contents for EP-85R
Page 6: ...6 Notes ...
Page 14: ...14 Notes ...
