manualshive.com logo in svg

Lowrance EP-85R, Installation And Operation Instructions Manual

Share
Download
Lowrance EP-85R Installation And Operation Instructions Manual Download Page 23

 23

Display Unit: EP-85R Operation 

This section covers how to use an EP-85R Storage Device with a 

display unit. 

 

The LMS-525cDF is one of many Lowrance display units that may be 

used with the EP-85R Storage Device. 

NOTE: 

Your unit may have a NMEA 2000 menu or a Networking menu, 

depending on the software version installed in your unit. Both 

menus allow you to perform the same NMEA 2000-related 

functions. 

Bus Setup 

Selecting Bus Setup from the NMEA 2000 or Networking menu will 

open the Bus Configuration menu, giving you access to the Engine-

Tank Configuration menu and the NMEA 2000 Devices list. The list, 

located in the top half of the Bus Configuration menu, shows all devices 

connected to the network. The Engine-Tank Configuration menu is 

located in the bottom half of the Bus Configuration menu. 

NOTE: 

Some of the menus shown in this section may differ slightly from 

the menus in your display unit, but your unit will perform the same 

functions in a similar manner.  

Engine & Tank Configuration 

The Engine-Tank configuration menu is located below the NMEA 2000 

Devices list, but will only be accessible if engine- or fuel-related devices 

are on the network.  

Summary of Contents for EP-85R

































Reviews:

No comments

Brands by name

Popular brands

Load more brands