42
To Reset Calibration:
Choosing the Reset Calibration command will switch fuel flow
calibration settings back to factory defaults.
1. Press
MENU
twice, select
NMEA
2000
or
N
ETWORKING
and press
ENTER
.
2. Highlight
F
UEL
M
ANAGEMENT
and press
ENTER
. 3. Highlight to
E
NGINE
S
ELECT
and press
ENTER
. Select the desired engine and press
ENTER
.
4. Highlight
R
ESET
C
ALIBRATION
and press
ENTER
. The following
confirmation message will appear:
Are you sure you wish to Reset
Calibration?
Select
Y
ES
and press
ENTER
. Calibration settings for the
selected fuel have been returned to factory defaults.
To Reset Trip:
The Reset Trip function allows you to reset to zero the running total of
fuel used on a particular trip.
1. Press
MENU
twice, select
NMEA
2000
or
N
ETWORKING
and press
ENTER
.
2. Highlight
F
UEL
M
ANAGEMENT
and press
ENTER
. The Fuel Management
menu will appear.
3. To reset trip fuel used for a particular engine, highlight
E
NGINE
S
ELECT
and press
ENTER
. Select the desired engine or All Engines and press
ENTER
.
4. Highlight
R
ESET
T
RIP
and press
ENTER
. The following confirmation
message will appear:
Are you sure you wish to Reset Trip?
5. Highlight
Y
ES
and press
ENTER
. The Trip Fuel Used figure has been
reset to zero.
To Reset Seasonal:
Your unit can track fuel usage not only for trips, but also for entire
seasons. The reset seasonal command allows you to reset to zero the
running total of fuel used during a season.
1. Press
MENU
twice, select
NMEA
2000
or
N
ETWORKING
and press
ENTER
.
2. Highlight
F
UEL
M
ANAGEMENT
and press
ENTER
.
3. To reset seasonal trip fuel used for a particular engine, highlight
E
NGINE
S
ELECT
and press
ENTER
. Select the desired engine or All Engines
and press
ENTER
.
4. Highlight
R
ESET
S
EASONAL
and press
ENTER
. The following
confirmation message will appear:
Are you sure you wish to Reset
Seasonal?
5. Highlight
Y
ES
and press
ENTER
. The Seasonal Fuel Used figure has
been reset to zero.