40
If you filled up the tank:
A.
Press the
F
ILL
T
ANK
button and press
ENTER
. The following message
will appear:
Are you sure you wish to Fill Tank?
Press
ENTER
. Another
message will appear:
Do you wish to re-calibrate the device?
Highlight
N
O
and press
ENTER
.
If you did not fill up the tank:
B.
Highlight
F
UEL
A
DDED
and press
ENTER
to access the
F
UEL
A
DDED
dialog
box. Use
↑
↓
,
←
→
to input the amount of fuel added to the tank and
press
ENTER
. Select the
A
DD
F
UEL
button and press
ENTER
. The following
message will appear:
Are you sure you wish to Add Fuel?
Highlight
Y
ES
and press
ENTER
.
6. Press
EXIT
repeatedly to get back to the main display.
EP-60R Fuel Flow Calibration
The default calibration for the EP-60R Fuel Flow is adequate in most
cases, but if Fuel Used readings are off by more than 3 percent,
calibration is recommended.
Fuel Flow Accuracy
To check fuel flow accuracy you must overlay Fuel Used data on your
display to be able to check the accuracy of fuel information coming from
the fuel flow.
To overlay Fuel Used data on your screen:
1. Press
MENU
, select
O
VERLAY
D
ATA
and press
ENTER
.
2. If you currently have any overlay data on your screen, it will be
listed here. Select
(E
NTER TO ADD
)
and press
ENTER
.
3. Highlight
NMEA
2000
or
N
ETWORKING
and press
ENTER
, which will open
the NMEA 2000 Devices list.
4. Select
EP-60R
F
UEL
F
LOW
and press
ENTER
and a list of data options
will appear.
5. Highlight
F
UEL
U
SED
and press
ENTER
.
6. Press
EXIT
twice to return to the page display, where Fuel Used data
will be displayed on the screen.
To check fuel flow accuracy:
1. After selecting Fuel Used as overlay data, fill up your tank and press
MENU
twice. Select
NMEA
2000
or
N
ETWORKING
and press
ENTER
.
2. Highlight
F
UEL
M
ANAGEMENT
and press
ENTER
. Select
T
ANK
L
OCATION
and
press
ENTER
.
3. Select the tank location and press
ENTER
.